Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL WARNING The oil is at high temperature immediately after the machine has been rear of the cover so that you can easily get out of the way. before 4 - 79 operated. Wait for the o il to cool down before starting the The undercover is heav directly beneath it. Whe y. Never try to open or close th n removing bolts(2), carry out the e cover when work from the I f t he quantity of the oil in the damper is insufficient, the damper may be seized. Accordingly, check, and add or g to the following procedure.

over from the rear bottom of the machine lts (1) from the front side of the machine er, remove two bolts (2) from the rear side body. the cover gradually. hine place replace the oil accordin 1. Remove the underc body as follows. 1) Remove two bo body. 2) Holding the cov of the machine 3) Lower and open (A) Front of mac (B) Dangerous 1. Remove the underc er, remove two bolts (2) from t he rear side 2. Remove oil level plu g (3) and check the oil level. T he proper oil level is the bottom e Tighten plug (3). dge of the plug hole. REMARK hile the engine is stopped. Check the oil level w If the machine is in clined, set it in a level pos l. checking the oil leve 3.

If the oil level is belo w the bottom edge of the plug h ole, remove oil filler plug (4) and Add new oil until th level plug (3). add new oil. e oil level reaches the bottom edge of oil of oil