. MAINTENANCE SERVICE PROCEDURE EVERY 4000 HOURS SERVICE REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING accumulator. 4 - 91 Maintenanc e for every 50, 250, 500, 100 0 and 2000 hours s ervic e should be c arried out at the Replace th e accumulator every 2 years or every 40 00 hours , whichever comes The accumul ator is charged w ith high-pressu re nitrogen g as, so mis taken operation may cause an explosio n, which will lead to serious injur y or damage. Wh en handling the accumulator , always d o as f ollows. The press ure in the hydrau lic circuit canno t be complet ely removed.
W hen removing the hydraulic equi pment, do not stand in the dire ction that the oil spurts out when carrying out the operation. In addition, loo sen the bolts slow ly when carrying out the operat ion. assemble the accumulator. ng it near flame or dispose of it in fire. ke holes in it or weld it. it, roll it, or subject it to any impact. Do not dis assemble the ac Do not bri ng it near flame or dispose of it i Do not ma ke holes in it or Do not hit it, roll it, or subj ect it to any imp When dis posing of the ac cumulator, the g as must be r eleased. Pleas e contact your Komatsu distribut or to have this work carried ou t.
If operation s are continue d when the fu nction of ac cumulat or (1) has droppe pressure in machine. If this hap d, it becomes impossible to release the remaining the hydraulic circuit when there is a failure in the pens, ask your Komatsu distributor to replace the CHECK WATER PUMP Check the water pump and its relative pa rts for wate r leak, an d if a nything abno rmal is found, cal l on your Komatsu distributor f or repairs or re placement. CHECK STARTING MO TOR tributor to have the starting motor checked. Contact yo ur Komatsu dis tributor to hav e the startin g motor checked. If t he engin e is started freq uently, have t his inspecti on carrie d out every 1000 h