. OPERATION EXPLANATION OF COMPONENTS GAUGES AND METER ENGINE COOLANT TEMPERATURE GAUGE the indicator should be in the green range. If the indicator enters the red range during operations, the overheat prevention system is actuated. (A) - (B): Red range (A) - (C): Green range (C) - (D): White range (A) - (B): Indicates red range (A) - (C): Indicates green range 3 - 17 This met During n er (4) shows the eng ormal operations, t The over heat prevention syst em is actuated as follows Red range (A) position: Engi ne coolant tempe monitor show s abnormality disp Red range (B) position:
Engi ne output lowers a erature monito nd engine r (1) coolant temp abno at sa The overheat prevention s shows rmality display. Ala rm buzzer sounds me time. ystem continues to work until the ge. indicator enters the green ran FUEL GA UGE itor (5) shows the amount of fuel remaining in the fuel ator should be in the green range during operations. cator enters the red range (A) during operation, carry out n and add fuel. This mon tank. The indic If the indi inspectio The corre ct fuel level may no t be displayed for a short tim e when the starti ng switch is turned ON, but this is not an abnormality .