EBS00064 CHECKING THE ENGINE OIL LEVEL 1. Place the vehicle on a level surface. 2. Check the engine oil level on a cold engine. NOTE: _ If the engine was started before checking the oil level, be sure to warm up the engine suffi- ciently, and then wait at least 10 minutes until the oil settles for an accurate reading. 3. Remove: dipstick accessing panel Refer to “SEAT AND SIDE PANELS”. 4. Check: engine oil level Oil level should be between the minimum level mark a and maximum level mark b . Oil level low Add oil to the proper level. NOTE: To obtain an accurate oil level reading, the dip- stick must be inserted completely into the oil filter hole.
b a И Recommended engine oil type For CDN YAMALUBE 4, SAE5W30, SAE10W30 or SAE20W40 For Europe and Oceania SAE5W30, SAE10W30, SAE10W40, SAE15W40, SAE20W40 or SAE20W50 Recommended engine oil grade API service SG type or higher, JASO standard MA 110˚ 130˚F YAMALUBE 4 (10W30) or SAE 10W30 -20˚ -10˚ 50˚C 3 - 33 CHECKING THE ENGINE OIL LEVEL CHK ADJ LUBE 4 (20W40) YAMAL SAE 5W 30 É