MMM M M MMM M M MMM M M MMM M M MMM M M MMM M MMM a. Wash the element gently, but thoroughly in solvent. WARNING _ Use a cleaning solvent which is designed to clean parts only. Never use gasoline or low flash point solvents as they may cause a fire or explosion. b. Squeeze the excess solvent out of the ele- ment and let it dry. CAUTION: _ Do not twist or wring out the element. This could damage the foam material. c. Apply Yamaha foam air filter oil or other quality foam air filter oil to the element. d. Squeeze out the excess oil. NOTE: _ The element should be wet but not dripping. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 6. Install: air filter element frame air filter element NOTE:
_ Make sure its sealing surface matches the sealing surface of the case so there is no air leak. 7. Install: air filter case cover 8. Install: right side panel left side panel fuel tank cover Refer to “SEAT AND SIDE PANELS”. EAS00094 CHECKING THE THROTTLE BODY JOINT 1. Remove: left side panel Refer to “SEAT AND SIDE PANELS”. 2. Check: throttle body joint 1 Cracks/damage Replace. Refer to “THROTTLE BODY” in chapter 6. 1 3 - 38 CLEANING THE AIR FILTER ELEMENT/ CHECKING THE THROTTLE BODY JOINT CHK ADJ