4 5 EBU27291 Multifunction display 1 “CLOCK” button 2 “RESET” button 3 “SELECT” button 4 Speedometer 5 Fuel meter 6 Clock/Hour meter 7 Odometer/Tripmeter A/Tripmeter B INSTRUMENT FUNCTIONS 2 3 1 6 7 The multifunction display is equipped with the following:
a speedometer (which shows the riding speed) an odometer (which shows the total dis- tance traveled) two tripmeters (which show the distance traveled since they were last set to zero) a clock an hour meter (which shows the total time the key has been turned to “ON”) a fuel meter a self-diagnosis device Odometer and tripmeter modes Pushing the “SELECT” button switches the display between the odometer mode “ODO” and the tripmeter modes “A” and “B” in the fol- lowing order: ODO TRIP A TRIP B ODO To reset a tripmeter, select it by pushing the “SELECT” button, and then push the “RESET” button for at least three seconds.
The tripme- ters can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. NOTE: Holding in the “SELECT” button and then turn- ing the key to “ON” switches the display between “mph” and “km/h”. 1 - 6 FEATURES GEN INFO