4. Remove: headlight bulb holder 1 headlight bulb 2 1 NOTE: _ Unhook the headlight bulb holder, and then remove the defective bulb. 2 WARNING _ Keep flammable products and your hands away from the bulb while it is on, as it will be hot. Do not touch the bulb until it cools down. 5. Install: bulb Secure the new bulb with the headlight unit. New _ Avoid touching the glass part of the bulb. Keep it free from oil; otherwise, the trans- parency of the glass, life of the bulb, and luminous flux will be adversely affected. If oil gets on the bulb, thoroughly clean it with a cloth moistened with alcohol or lac- quer thinner. CAUTION: 6. Install: headlight bulb holder 7. Connect: headlight coupler 8.
Install: headlight bulb cover cover at the rear of the headlight 3 - 83 REPLACING THE HEADLIGHT BULBS CHK ADJ