4. Measure: rocker arm shaft outside diameter Out of specification Replace. Rocker arm shaft outside diame- ter 11.981 ~ 11.991 mm (0.4717 ~ 0.4721 in) 5. Calculate: rocker-arm-to-rocker-arm-shaft clearance NOTE: _ Calculate the clearance by subtracting the rocker arm shaft outside diameter from the rocker arm inside diameter. Out of specification Replace the defective part(s). Rocker-arm-to-rocker-arm-shaft clearance 0.009 ~ 0.037 mm (0.0004 ~ 0.0015 in) EAS00243 INSTALLING THE CAMSHAFT AND ROCKER ARMS 1. Install: bearing 1 (onto the cylinder head) 1 NOTE: Apply engine oil to the bearing. Install the bearing so that the seal is facing a the camshaft.
a b 4 - 22 ROCKER ARMS AND CAMSHAFT ENG Installed depth b 0 mm (0 in)