EBS00309 INSTALLING THE CLUTCH 1. Install: clutch carrier assembly nut 1 CAUTION: The clutch carrier assembly nut has left- handed threads. To tighten the clutch car- rier assembly nut turn it counterclockwise. NOTE: Use a clutch holding tool 2 to hold the clutch carrier assembly. 2. Lock the threads with a drift punch. 3. Install: one-way clutch bearing NOTE: _ The one-way clutch bearing should be installed in the clutch carrier assembly with the “OUT SIDE” mark a facing toward the clutch housing. 4. Install: dowel pins gasket clutch housing assembly New NOTE: T R . . 10 Nm (1.0 m · kg, 7.2 ft · lb) _ Tighten the bolts in stages, using a criss- cross pattern.
After tightening the bolts, check that the clutch housing assembly rotates smoothly. 4 - 67 CLUTCH ENG New 190 Nm (19.0 m · kg, 140 ft · lb) T.R. Universal clutch holder 90890-04086, YM-91042