7) Round off hundredth digit and select appro- priate shim(s). In the example above, the calculated shim thickness is 0.72 mm. The chart instructs you, however, to round off 2 to 0. j Shims are supplied in the following thickness. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL a INSTALLING THE BEARING AND OIL SEALS 1. Install:
bearing 1 oil seal 2 oil seal 3 1 5 4 2 b Installed depth of bearing a 0.9 ~ 1.4 mm (0.035 ~ 0.055 in) Installed depth of oil seal b 1.0 ~ 1.5 mm (0.039 ~ 0.059 in) Installed depth of oil seal c 1.0 ~ 1.5 mm (0.039 ~ 0.059 in) 3 c 6 4 Middle drive pinion gear bearing retainer 5 Bearing housing 6 Middle driven shaft bearing retainer 7 Crankcase 7 4 - 99 MIDDLE GEAR ENG Hundredths Round value 0, 1, 2 0 3, 4, 5, 6, 7 5 8, 9 10 Middle drive pinion gear shim Thickness (mm) 0.10 0.40 0.15 0.50 0.20 0.60 0.30