1 3. Install: middle driven gear shim(s) 1 bearing housing NOTE: _ Install the shim(s) so that the tabs are posi- tioned as shown in the illustration. 1 4. Install: rear drive shaft coupling gear (middle gear side) 1 washer rear drive shaft coupling gear nut (middle gear side) 2 1 2 LT 3 NOTE: Use the coupling gear/middle shaft tool 3 to hold the coupling gear. Coupling gear/middle shaft tool 90890-01229 Gear holder YM-01229 5. Install: front drive shaft coupling gear (middle gear side) 1 washer front drive shaft coupling gear nut (middle gear side) 2 1 2 3 NOTE: Use the coupling gear/middle shaft tool 3 to hold the coupling gear.
Coupling gear/middle shaft tool 90890-01229 Gear holder YM-01229 4 - 101 MIDDLE GEAR ENG T.R. 150 Nm (15.0 m · kg, 110 ft · lb) T.R. 115 Nm (11.5 m · kg, 85 ft · lb)