3 2 EBS00140 ASSEMBLING THE WATER PUMP 1. Install: oil seal 1 (into the AC magneto cover 2 ) New NOTE: a _ Before installing the oil seal, apply tap water or coolant onto its out surface. Install the oil seal with a socket 3 that matches its outside diameter. 1 New И New 2. Install: water pump seal 1 (into the AC magneto cover 2 ) 3 4 CAUTION: 1 New _ Never lubricate the water pump seal sur- face with oil or grease. 2 NOTE: _ Install the water pump seal with the special tools. Mechanical seal installer 3 90890-04132 Water pump seal installer YM-33221-A Middle driven shaft bearing driver 4 90890-04058 Bearing driver 40 mm YM-04058 И Push down.
5 - 10 WATER PUMP COOL COOL Installed depth of oil seal a 8.1 ~ 8.7 mm (0.32 ~ 0.34 in)