2 - 3 GENERAL SPECIFICATIONS SPEC Item Standard Spark plug Type/manufacturer Spark plug gap CPR7EA-9/NGK 0.8 ~ 0.9 mm (0.031 ~ 0.035 in) Clutch type Wet, centrifugal automatic Transmission Primary reduction system Secondary reduction system Secondary reduction ratio Transmission type Operation Single speed automatic Sub transmission ratio low high Reverse gear V-belt Shaft drive 41/21 × 24/18 × 33/9 (9.544) V-belt automatic Left hand operation 2.380 ~ 0.700 :
1 31/16 (1.938) 29/25 (1.160) 23/14 × 28/23 (2.000) Chassis Frame type Caster angle Camber angle Kingpin angle Kingpin offset Trail Tread front (STD) Tread rear (STD) Toe-in (with tires touching the ground) Steel tube frame 5.0° 0° 11.0° 0 mm (0 in) 26.0 mm (1.02 in) 940.0 mm (37.01 in) 915.0 mm (37.01 in) 0 ~ 10.0 mm (0 ~ 0.39 in) Tire Type front rear Size front rear Manufacturer/model front rear Tubeless Tubeless AT25 × 8-12 AT25 × 10-12 DUNLOP/KT421 (For CDN and Europe) CHENG SHIN/C828-4P (For Oceania) DUNLOP/KT425 (For CDN and Europe) CHENG SHIN/C828-4P (For Oceania) Tire pressure (cold tire) Maximum load* Off-road riding front rear *Load is total weight of cargo, rider, accesso- ries, and tongue 220.0 kg (485 lb) 32 ~ 38 kPa (0.32 ~ 0.38 kg/cm2, 4.6 ~ 5.5 psi) 27 ~ 33 kPa (0.27 ~ 0.33 kg/cm2, 3.9 ~ 4.8 psi) Brake Front brake type operation Rear brake type operation Dual disc brake Right hand operation Dual disc brake Left hand and right foot operation