4. Install: throttle cable 5. Check: throttle position sensor Refer to “CHECKING AND ADJUSTING THE THROTTLE POSITION SENSOR”. 6. Adjust: throttle lever free play Refer to “ADJUSTING THE THROTTLE LEVER FREE PLAY” in chapter 3. 7. Adjust: engine idling speed Refer to “ADJUSTING THE ENGINE IDLING SPEED” in chapter 3. EAS00915 CHECKING THE FUEL PUMP AND PRESSURE REGULATOR OPERATION 1. Check: pressure regulator operation MMM M M MMM M M MMM M M MMM M M MMM M M MMM M MMM a. Remove the rear fender. Refer to “REAR CARRIER AND REAR FENDER” in chapter 3. b. Remove the fuel hose connector holder. c. Disconnect the fuel hose 1 from the fuel pump. NOTE:
When removing the fuel hose from the fuel pump, remove the fuel hose connector holder first, and next, insert a slotted head screw driver etc. in the slot part a of the fuel hose connector cover 2 , then slide it in the direction of the arrow, and remove the fuel hose. Before removing the hose, place a few rags in the area under where it will be removed. d. Connect the pressure gauge 3 and adapter 4 to the fuel pump and fuel hose. 4 3 1 Pressure gauge 90890-03153, YU-03153 Fuel pressure adapter 90890-03176, YM-03176 6 - 38 THROTTLE BODY FI FI 2 2 a 1 1