EBS00157 TROUBLESHOOTING CHART When basic condition “a” and “b” exist, check the following points: Remove the drive shaft components. 7 - 3 TROUBLESHOOTING DRIV DRIV Elevate and spin both wheels. Feel for wheel bearing damage. YES Replace the wheel bearing. (Refer to “STEERING SYSTEM” and “REAR KNUCKLES AND STABILIZER” in chapter 8.) NO Check the wheel nuts and hub nuts for tight- ness. NO Torque to specification. (Refer to “FRONT AND REAR WHEELS” in chapter 8.) YES Check the front constant velocity joints. Feel for bearing damage. NO Constant velocity joint bearings and differ- ential gear bearings are probably not dam- aged. Repeat the test or remove the individual components.
YES Check the rear brake adjustment. NO Adjust per instructions. (Refer to “ADJUSTING THE REAR BRAKE” in chapter 3.) YES Check the rear constant velocity joints. Feel for bearing damage. NO Constant velocity joint bearings and final drive gear bearings are probably not dam- aged. Repeat the test or remove the individ- ual components. YES