EBS00447 REMOVING THE HANDLEBAR GRIPS 1. Remove: handlebar grips 1 NOTE: _ Blow compressed air between the handlebar and handlebar grip, and gradually push the grip off the handlebar. EBS00448 CHECKING THE HANDLEBAR 1. Check: handlebar Bends/cracks/damage Replace. WARNING _ Do not attempt to straighten a bent handle- bar as this may dangerously weaken the handlebar. EBS00449 INSTALLING THE HANDLEBAR 1. Install: handlebar handlebar holders NOTE: _ Install the handlebar within 15° from the hori- zontal line shown in the illustration. The upper handlebar holders should be installed with the punched mark 1 forward 2 . CAUTION:
_ First tighten the bolts 3 on the front side of the handlebar holders, and then tighten the bolts 4 on the rear side. 8 - 33 STEERING SYSTEM CHAS CHAS T.R. 20 Nm (2.0 m · kg, 14 ft · lb)