Ball joint remover 90890-01474, YM-01474 Ball joint remover attachment set 90890-01480 Ball joint adapter set YM-01480 5 4 7 0 A 6 c. Install the body 4 , long bolt 5 , base 6 and attachment 7 onto ball joint. d. Hold the body 4 in place while turning in the long bolt 5 to remove the ball joint 0 from the front upper arm A . e. Remove the ball joint remover. f. Attach the assembled ball joint remover/ installer, new ball joint (with rubber boot and retaining ring) B , installer spacer 8 and installer washer 9 to the front upper arm A . _ Do not tap or damage the top of the ball joint. Installer washer 9 must be aligned with the projection on the head of the ball joint B . NOTE: g.
Remove the ball joint remover. h. Install a new circlip. NOTE: _ Always use a new ball joint set. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 8 - 50 FRONT ARMS AND FRONT SHOCK ABSORBER ASSEMBLIES CHAS CHAS 4 Body 90890-01474 YM-01474 5 Long bolt 6 Base 90890-01480 YM-01480 7 Remover attachment 90890-01474 YM-01474 8 Installer spacer 90890-01480 YM-01480 9 Installer washer 90890-01474 YM-01474