12.Install: O-ring camshaft sprocket cover New 1 New O-ring 1 intake tappet cover New O-ring exhaust tappet cover 13.Install: fast idle plunger unit 14.Install: air filter case Refer to “AIR FILTER CASE”. footrest board Refer to “FOOTREST BOARDS”. front fender Refer to “FRONT FENDERS AND FRONT GRILL”. left side panel Refer to “SEAT AND SIDE PANELS”. EAS00869 ADJUSTING THE EXHAUST GAS VOLUME (For Europe and Oceania) NOTE: _ Be sure to set the CO density level to stan- dard, and then adjust the exhaust gas volume. 1. Turn the main switch to “OFF” and set the engine stop switch to “ON”. 3 - 22 ADJUSTING THE VALVE CLEARANCE/ADJUSTING THE EXHAUST GAS VOLUME (For Europe and Oceania) CHK ADJ T.
10 Nm (1.0 m · kg, 7.2 ft · lb) R. New T. 10 Nm (1.0 m · kg, 7.2 ft · lb) R. T. 10 Nm (1.0 m · kg, 7.2 ft · lb) R.