Service and Maintenance 6.5 Belt Drives © 26 449 0 © 26 383 0 Check, tension and change belts only with the engine off. Refit belt guard, if provided. 6.5.15 Changing Coolant / Fuel Pump Belts 1013 E Changing : Slacken off bolts 1, 2 and 3. Move alternator 5 in direction of arrow (B) until belt is exposed. Remove and replace belt, tension (see above). Re-tighten bolts 1, 2 and 3. Push fuel pump 3 in direction of arrow until correct belt tension is achieved. 6.5.14 Tensioning Coolant /Fuel Pump Belts 1013 E Slacken off bolts 1 and 2. Tighten bolts 1 and 2. Tensioning: Slacken off bolts 1, 2 and 3. Move alternator 5 in direction of arrow (A) until correct belt tension is achieved.
Re-tighten bolts 1, 2 and 3. 6.5.13 Tensioning /Changing Alternator Belt 1013 © 2002 6 © 26 380 0 © 26 380 0 © 26 383 0 © 26 383 0