Komatsu — General

OM3262 2/13 Operator Cab And Controls - Section 32 Page 32-1 DRIVE SYSTEM SOUND ATTENUATION SYSTEM RETARDING GRID ATTENUATION PACKAGE Approximate weights General The retarding grids have been modified with sound attenuation devices attached to the inlet & exhaust ports as shown in Figure 32-1. Always use a lifting device that can handle the load safely. Refer to Figure 32-1 for the items listed below. Top inlet attenuator (1) - 100 kg (220 lb) Top inlet air duct (2) - 18 kg (40 lb) The retarding grid assembly will be hot after the truck has been in operation. Wait until the retard- ing grid and other hot parts have had sufficient time to cool before performing any maintenance work.

Rear inlet cover (3) - 8 kg (18 lb) Inboard inlet cover (4) - 7 kg (15 lb) Front inlet air duct (5) - 10 kg (22 lb) Front inlet attenuator (6) - 63 kg (139 lb) Exhaust attenuator (7) - 61 kg (134 lb) Retarder grid with sound attenuation - 2 540 kg (5,600 lb) FIGURE 32-1. RETARDING GRID SILENCER PACKAGE 1. Top Inlet Attenuators 2. Top Inlet Ducts 3. Rear Inlet Cover 4. Inboard Inlet Cover 5. Front Inlet Air Duct 6. Front Inlet Attenuators 7. Exhaust Attenuators