OM3262 2/13 Operator Cab And Controls - Section 32 Page 32-3 Alternator Air Intake Silencer Approximate weights There is an alternator air intake silencer (2, Figure 32-3) fitted to the intake of the alternator blower fan ducting. Maintenance Always use a lifting device that can handle the load safely. Refer to the Sound Attenuation System Service sec- tion for inspection requirements. The air intake silencer can not be serviced. If damaged, replace the entire intake silencer. Refer to Figure 32-1 for the items listed below. Top Inlet Duct (1) 79 kg (174 lb) Intake Silencer (2) 202 kg (445 lb) Do not pressure wash the sound attenuation sur- faces.
Malfunction and damage may occur, reducing the effectiveness of the attenuators. Lower Inlet Duct (3) 130 kg (287 lb) Air Intake Silencer Assembly (with both ducts attached) 550 kg (1,213 lb). Lifting lugs are fitted to top inlet duct (1, Figure 32-3) intake silencer (2) and lower inlet duct (3). Removal of the silencer can be accomplished by lifting it in conjunction with the top inlet duct. FIGURE 32-4. INTAKE SILENCER BAFFLES FIGURE 32-3. INTAKE SILENCER 1. Top Inlet Duct 2. Intake Silencer 3. Lower Inlet Duct