. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE WARNING Perform the following inspections and cleaning every day before starting engine for the day's work. 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, perform repairs. 7. Check for loose air cleaner mounting bolts. Check for the loose bolts. If loose, tighten them. 3 - 70 WALK-AROUND CHECK Before starting the engine, look around the ma chine and under the machine to check for loose nuts or bolts, or ndition of the hydraulic system.
leakage of oil, fuel, or coolant, and check the co Check also for loose wiring, play, and accumulati on of dust in places that get very hot and are exposed to extremely high temperatures. Always hang the warning tag from the gear shift le ver. Leakage of oil or fuel, or accumulation of flammabl e material around the battery or high temperature parts of the engine, such as the engine muffler or turbocharger, may cause f ire. Check carefully, and if any problem is found, repair it or contact your Komatsu distributor. 1. Check the dump body, frame, tires, cylinder s, linkage, and hoses for cracks or excessive wear or play.
Check the dump body, frame, tires, cylinde perform repairs if any problem is found. rs, linkage, and hoses for cracks or excessive wear or play, and 2. Remove dirt from around engine, battery, ra diator, and aftercooler. Check that there is no dirt or dust accumulat is no flammable material (dry leaves, twi turbocharger, or other high temperature par found. ed around the engine, radiator or aftercooler. Check also that t here gs, etc.) accumulated around the battery, or engine, muffler, ts of the engine. Remove any dirt or flammable materials that are are 3. Check for leakage of water or oil around eng ine Check that there is no oil leakage from the e is found, repair it.
ngine or coolant leakage from the cooling system. If any problem 5. Check for oil leakage from transmission case , differential case, final drive case, hydraulic tank, brake contr ol oil tank, hoses, and joints Check that there is no oil leakage. If any pro Check for leakage of oil from the undercove blem is found, repair the place where the oil is leaking. r. Check the ground for traces of oil leakage. 6. Check for damaged or worn tires, wheels, a nd wheel hub bolts and nuts, check for loose wheel hub bolts and nuts. Check for cracks or peeling of the tires and Tighten any loose wheel hub bolts or nuts.
If any valve caps are missing, install new ca for cracks or wear to the wheels (side rim, rim base, lock ring). If any abnormality is found, repair or replace the part. ps.