. OPERATION OPERATION does not operate as explained above, there is probably a failure, so ask your Komatsu CHECK EMERGENCY STEERING distributor. 3 - 76 CHECK CENTRALIZED WARNING LAMP, ALARM BUZZER, MONITOR LAMPS AND METE RS Before starting the en gine, set the starting switch in O N position and check that the ma chine monitor operates as follows.
The centralized wa rning lamp is lit for 2 seconds, t hen goes o The alarm buzzer s ounds for 2 seconds , then stop The monitor lamps is lit for 2 seconds, th en go off for 1 secon The gearshift indic ator displays "88" for 2 seconds , then goe The meters start th e operations after the system is checked f The character displ ay displays "KOMAT SU" for 3 seconds. If the machine monito distributor for inspecti CHECK BRAKING EFF Check if the braking c apacity of the parking brake, fo ot brake, a If any abnormality is fo und, ask Komatsu di stributor to repair. Check manual emergenc y steering h key to ON position. teering switch (1) ON, and check that th n be operated.
eel cannot be operated, ask your Komats 1. 2. 1. Turn starting switc h key to ON position. 2. Turn emergency s steering wheel ca If the steering wh eel cannot be operat Check auto-emergency s teering witch key to START position and start th ake oil pressure caution lamp is OFF, the ol lever (2) fully and stop the engine. 1. 2. 3. 4. 1. Turn the starting s engine. Check that the br pull retarder contr Turn starting switc Check that the em steering can be op h key to ON position. ergency steering mo erated 1 sec. after p tor is actuated and th arking brake switch ( is set to the TRAV EL position. CHECK BACKUP ALA RM arting switch to ON position. 1. Turn the engine st arting switch to ON p 2.
Place the gear shi ft lever in the R positi on and ch eck that th e backup alarm is worki