. OPERATION OPERATION MOVING MACHINE IN REVERSE WARNING When switching between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so use extreme caution when reversing the machine. Always stop the machine completely before shifting between FORWARD and REVERSE. 3 - 91 Operate gear shift leve r (1) to the R1 or R2 position, then gradually depress accelerator pa nel (2) to move the machine off. NOTICE The machine cannot tr avel in reverse if the dump body is raised. Lower the dump body, set the dump lever to FLOAT position, then opera te the gear shift lever to "R1" or "R2" position.
n FORWARD and REVERSE, stop the machine When shifting betwee chine completely and run the engine at low idle when shiftin g the lever . After moving the gear shift lever, do not accelerate unti l you detec t that the transmission clutc h has engaged. Do not operate the gear shift lever with the accelerator p edal depressed. This will cause a big s hock and will also reduce the s ervic e life of the machine.