. OPERATION OPERATION SHIFTING GEAR WARNING will be poor. 3 - 94 Do not move th e gear shift lever to N (neutral) position when the mach ine is traveling or when it is travel ing down a slope. Always place the trans mission in gear before travelin If the transm ission is in Neutral, the engine cannot provide any br aking effect and the steering whe el will become heavier. In re will be lack of cooling oil for the retarder, so there is danger that it will overheat or that the actuation of the brake There may a lso be damage to the transmiss ion or other parts of th e power train, and there is danger of unexpected accidents. When shifting gear, do as follows.
ission, so set gear shift d the transmission will the travel speed. This machine lever (1) to automatically has an automatic transm the desired position, an shift to a position to match When the du position, the t - 5, the trans mp body is raised, if the ge ransmission is fixed in 2nd, mission is fixed in 1st. Keep ar shift lever is at the D and if it is at positions 1 the dump body lowered when travelin g. NOTICE When shifti ng between FORWARD and REVERSE, stop the machine completely, moving the detect that t and run the engine at low idle w hen shifting the lever. After gear shift lever, do not depres s the accelerator until you aged.
he transmission clutch has eng Do not oper ate the gear shift lever with the a ccelerator pedal depressed. This will cau machine. se a big shock, and will also r educe the service life o f the SHIFTING UP celerator pedal (2) is depressed to accelerate the 1. When ac machine, to direct d 2. If the ma automatic 1. When ac the lockup clutch is engage d to shift the transmission rive. chine is accelerated further, the transmission will ally shift up.