. OPERATION OPERATION 3 - 103 OPERATION USING DIFFERENTIAL L When trave ling on roads su ch as soft ground, s teep uphill road , etc. where the tires a re likely to slip, av oid sudden changes in speed, and use the differential lock s (inter-axle differentia l lock, and left a nd right differenti al lock). Operate th e inter-axle differ ential lock switch an d the left and r ight dif ferential lock pe dal to actuate the differential lock at 5 to 10 m (16 ft 5 in t o 32 ft 10 in) before entering the roads w here the tires ar e likely to slip.
To make f ull use of the pe differential lock before the ti res slip NOTICE ssible, do not use the differential lock (inter-axle, left and right differential lock) when turning. xle differential lock is used when turning: difficult to operate the steering wheel. As far as po ssible, do not use t he differential lock (in ter-axle, left and right dif ferential lock) wh If the inter-a xle differential lock is used when turning It will be difficult to operate t he steering wheel. It will bec ome more inter-ax le difficult to turn tha n when the differential l ock is not used, a nd in some cases, it may not be possible to steer around cur ves which were previo usly possible. ing:
If the left an d right differential l ock is used when turn It will be difficult to operate t he steering wheel. It will bec ome more left and right difficult to turn th an when the differential lock is not used, and in some cases, i t may not be possible to steer around cur ves which were previo usly possible. When the left and right differ ential lock is actuated , the wheel on the inside of the curve attem pts to turn at the sa me speed as the wheel on the outside, so the wheel may spin a nd there may be premat ure wear of the tir e or damage to the r oad surface.
When tra veling on dry road s or other road surfac es where the friction in dex is high, if the left and right differe ntial lock is actuated, caused b lock slips the differential loc k will slip in order to absorb the difference in rotating speed b etween the left and right wheels y turning, and this w ill reduce the durabili ty of the differential lock . Noise will also b e generated when th e differential . When the left and right differ ential lock is actuated , the load on the final dr ive increases, and this may reduce th e service life of the fin al drive.