. OPERATION TROUBLESHOOTING ACTION CODE stop the machine, apply the parking brake and check the service code, then contact your REMARK 3 - 142 If any problem occur Komatsu distributor If action code "E03" i s displayed on the character display (1), or if an action code is displayed after taking the re medy when action code "E 02" was displayed, or if "MAINTENA NCE" is displayed together with a ction code "E01", do as follows to check the failure code. 1. If an action code is displayed, pressed the top (>) port ion of machine monitor mode selec tor switch (2) and check the failure code. The failure code is displayed on ch aracter display (1). 2.
Press the top (>) portion of machine monitor mode s elector switch (2) again. The servi ce meter and odometer will be displayed for several seconds, and the scree n will then return to the action cod If more than one failure has occurred, the next failur 3. Check the failure code, then contact your Komatsu The 6-digit code displayed on the left of the line at th e top of the character display is th The code display ed at the right side of the failure cod e shows the controller that detect ed the failure cod MON: Machine m TM: Transmissio ENG: Engine con BK: Retarder con The line at the bo ttom of the character display shows the system where the failure was