. MAINTENANCE SERVICE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST CHECKING ADJUSTING initial elongation, so adjust the belt again after 4 - 52 Pres conditioner compressor pulley (1 ) and drive pulley ( 2) with th e thumb (a pprox. 58.8 N {6 kg}). If deflection (A) is 10 mm (0.4 in), the be lt tension is normal 1. L 2. T urn nut (2) to a approx. 1 0 mm 0.4 in) when p ressed with the th umb at a point m idway etween the air c f approx. 58.8 N ighten bolt (1) osition. 4. C heck each pulle y for damage, wear of the V-groove, an d wear f the V-belt. In p articular, be sure to check tha t the V-bel t is not ouching the bott om of the V-groove 5.
I f the V-belt is s o lengthened that i be adjuste more or if it has any cuts or cracks, replace it 6. I f the V-belt has art perating for 2 to