Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CLEAN TRANSMISSION CASE STRAINER WARNING CLEAN STRAINER IN DIFFERENTIAL LOCK HYDRAULIC CIRCUIT WARNING 4 - 89 Immediately after t he engine is stopped, i ts parts and o il are stil l very hot, and may cause burn injury . Accordingly, wait until they have cooled d own before starting th e work. If there is still pres sure remaining inside the case , the o il or plu g may fly o ut. Loosen the plug sl owly to release the pre Drain the oil from th e transmission case before starting the operation . For details, see Secti on "CHANGE OIL IN TRANSMISSION CASE (PAGE 4-68)". 1. Remove bolt (1), then remove cover (2) and take out the strainer. 2.

Remove any dirt stuck to the strainer, then wash in clean diesel fuel or flushing oil. If the strainer is damaged, replace it. 3. Install the strainers in their original position. ASE (PAGE 4-68)". 2. Remove any dir t stuck to the straine r, then w ash i n clean diese fuel or flushing oil. If the strainer is damaged, re place it 3. Install the strain ers in their original position Immediately after t he engine is stopped, i ts parts and o il are stil l very hot, and may cause burn injury . Accordingly, wait until they have cooled d own before starting th e work. , the oil or plug may fly out. If there is still pres sure remaining inside the case , the o il or plu g may fly o ut.

Loosen the plug sl owly to release the pre ssure. Clean the strainers (4 places) of the dif ferentia l lock hydrau lic circuit as 1. Remove plug (1 2. Take the strain er out from strainer case (2) , the n wash it in clean 3. Assemble the s trainer to strainer ca se (2), then install p lug (1). Suction strainer f or front differential l ock This is at the top of the front differen tial case