. MAINTENANCE SERVICE PROCEDURE CLEAN BREATHER WARNING CHECK ACCUMULATOR GAS PRESSURE when making periodically replacement of safety 4 - 91 Immediately after t he engine is st opped, its parts a nd oil a re still very hot, and may cause burn injury. Accordingly, wait until they have cooled down before startin g the work. Remove th e mud and dirt fro m around the breather, then remove the breather, and use cle an diesel fuel or flushing oil to rinse off the dirt s tuck to the filter inside the b reather.
Transmission breather Hydrauli c tank breathe Ask your K omatsu distributor to h ave the ga s pressure checked parts or pe rforming the legall y required 2000 hour or every year CHECK, ADJUST ENGINE VALVE CLEARANCE Special too ls are needed for i nspection and maintenance, so contact your Komatsu distri