. MAINTENANCE SERVICE PROCEDURE LUBRICATE DRIVE SHAFT grease (G2-LI), and perform the the following figure. 4 - 95 EVERY 6000 HOURS SER Maintenance f or every 50, 250, 500, 1000 and 2000 hours ser vice should be c arried out at the same When greasin g, use lithium g greasin g ever y 6000 h ours or e 1. By using a grease pump, p ump in grease through the grea fittings ma rked by the arrow s. 2. Grease th e spider portion un til grease com es out from the c sea Afte l. r greasing, wipe off any old grease that was pushed ou 4.
Grease th e spline with the g rease filling a mount shown in t following t able through the grease fitting shown with arrows Location Amount of filled grease (1) 65 g (2) 110 g (3) 60 g