Komatsu — METHOD OF OPERATION

. ATTACHMENTS, OPTIONS HANDLING AUTOMATIC RETARDER, ACCELERATOR CONTROL(ARAC) AUTOMATIC RETARDER, ACCELERATOR CONTROL SWITCH This switch (1) is used to turn on and off the ARAC system. ACCELERATOR PEDAL The ARAC system functions only while accelerator pedal (3) is released. METHOD OF OPERATION 6 - 3 (A): The ARAC system begins t o function when a travel speed is over 7 km/h and the accel retarder pilot lamp lights revolution, the retarder pilot the ARAC system is in serv erator pedal is released, and the on. (In a lower range of engine lamp may not light on even though ice.) t function. (B):

The ARAC system does no RETARDER CONTROL LEVER This lever (2) activates the retar der even while the ARAC system is in s ervice. REMARK When the ARAC system is in se rvice, the retarder control lever has som e play . It does no t mean that the re tarder does not work, but that the ARA C system is in service. BRAKE PEDAL This pedal (4) can activate the wheel brakes even while the ARAC syste m is i RETARDER PILOT LAMP This lamp (5) lights on when the ARAC system begins to function and whe n the r etarder is o perated with the re tarder control lever. ACTUATION OF ARAC SYS TEM unction when the automatic retarder, accelerator control switch is turned to ON The ARAC system begins to f position.

When the automatic retarder, a ccelerator control switch is turned to ON position, the retar der automatically works according to the present gear s peed selected and engine revolution . If the brake pedal is depressed while the ARAC system is in service, the system stops func tioning, accelerati ng the truck's travel speed. If the brake pedal is depressed, or the retarder control lever is used, whil e the ARAC syste m is in service, th en the dump truck can be slowed dow n or brought to a halt just as in normal br aking operation. control switch