Komatsu — WHEN ERROR CODE F-09 IS DISPLAYED

. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER HM operation (PAGE 6-30)". operation (PAGE 6-30)". 6 - 33 *3: (1) If more than 2600 cycl es are saved in memory (s pace for 3 00 cycle s remaining), "L:FUL" flash (2) If more cycles are reco rded and the total exceeds 2900 cycle s, numbers 2901, 29 02, etc. are sa ved in memory, but the oldest cycle da ta are deleted in turn. (3) If this error code flash es, download to the PC, th en delete a ll data. For details, s ee Section "(e ) Data all clear *4: Engine ON/OFF data (1) If more than 105 times are saved in memory (sp ace for 10 t imes re maining), "E:

(2) If more times of engine ON/OFF are recorded and the total ex ceeds 1 15 times, nu mbers 116, 117 , etc. are s aved in memory, but the old est engine ON/OFF data a re deleted in turn. (3) If this error code flash es, download to the PC, th en delete a ll data. For details, s ee Section "(e ) Data all clear *5: When equalizer bar co ntacts stopper (1) If the equalizer bar is i n contact with the stopper, an accurate measurement cann ot be obtained. If the machine is stopped empty at th e loading point, contact be tween the equalize r bar and sto pper is detecte d. (2) Drive the machine forw ard a little at a time until er ror code "F -FL" dis appears from the display.

S et the gearshift lever at D. After stopp ing the machine, return th e gearshift lever to N. *6: Articulation angle too l arge If t he dumping mode is se lected when measuring, th e measure d value i s saved imme diately before the dump body is r aised. If the articulatio n angle is too large when t he measurement i s made, the a ccuracy will be poor. "F-AC" is displayed when the dumping mode has bee n selected and the articulation h as been turned more tha n half (approx. 22.5 deg.) when the machine is stopped w hile loaded. raight so that the error code is not displayed. If " F-AC" is displayed whe n dumping, set the machi ne facing st raight s o tha t the err or code is not d isplayed.

WHEN ERROR CODE F-09 IS DISPLAYED Th e payload meter has a starting switch is turned t If t he battery voltage drop s, error message [F-09] is displayed. If [F-09 ] is displayed, it is necessar y to replac e the internal battery. Consult your Komatsu distributor.