. OPERATION EXPLANATION OF COMPONENTS the pilot lamp on the machine monitor light up. 3 - 33 POWER MODE SELECTOR SWIT This switch (5) is used to swi possible to travel economica conditions. If portion (a) of the switch is p ressed, high-power mode pilot lamp (P) lights up and the system i s switched to the high-power mode. If portion (b) of the switch is pr essed, economy mode pilot lamp (E) lights up and the system is sw (a): High power mode (genera l operations) g conditions ns on flat ground) Normal standard operatin (b):
Economy mode (operatio Work with emphasis on fu ground where the maximu el consumption, such as work on flat m power is not needed When working at night, the sy mbol inside the switch lights up regardless of the select ed position of the switc EMERGENCY STEERING SWITCH ate the emergency steering pump. This switch (6) is used to actu When the switch is pressed, the emergency pump is actuated to e steering. make it possible to operate th When the switch is ON, the p ilot lamp (red) inside the switch and The emergency steering pum p can be used for a maximum of 90 seconds.
When the emergency steering is being used, keep the travel speed to a maximum of 5 km/h (3.1 The emergency steering is ac tuated automatically in the following When the steering hydraul When the engine has stop When the emergency steerin g is actuated, stop the machine promptly and perform ins If the starting switch is at ON position and the parking brake switch is at TRAVEL position when the engi ne is stopped, the automatic emerg ency steering is actuated after 1 second, so set the parkin g brake switch to PARKING position.