Komatsu — DOORS AND WINDOWS

OPERATION CAB AND GUARDS The cab offers the operator the option of a controlled environment as well as the safety of the ROPS (rollover protective struc- ture). The guards equipped with the machine are there to protect all personnel from injury due to contact with moving or hot parts. It is important that all these structures be kept in good condition and replaced if damaged. CAB DOORS AND WINDOWS On the cab, the rear upper window (1) of the cab can be opened com- pletely. When open, the window is positioned and secured under the roof. The lower window is fixed in place. When raising the upper win- dow, be sure it is securely latched in place.

Doing so will prevent the window from suddenly falling out during operation. Operate the rear cab doors (1) only after releasing the window latches (2) by pulling and lifting the window itself. After positioning the window, fit the window latches (2) into the holes in the track. Open the side windows after releasing the safety lock (8). Therefore, proceed in the following sequence: Press button (9) to release safety lock (8), then press lock lever (3). 2-28 WB140PS-2N WB150PS-2N