OPERATION CONTROL LEVER POSITIONS The loader control lever (4) can move many different ways. And each position has a different function. LOADER BUCKET/ARM POSITIONS When the control lever is moved forward or backward and at right and left angles, the bucket and arm will move in the positions indicated in the illustration. N - Neutral position (no boom or bucket movement) A - Bucket curl back B - Arm lower C - Bucket dump D - Arm raise E - Arm in free float position F - Self leveling (return to dig) DUAL FUNCTIONAL BUCKET/ARM POSITIONS When the lever is operated in the direction shown in the illustration, a dual function of the bucket and arm can be achieved.
N - Neutral position (no boom or bucket movement) A - Arm lowering - Bucket curling B - Arm lowering - Bucket dumping C - Arm raising - Bucket dumping D - Arm raising - Bucket curling Remark Do not use the “Arm In Free Float Position” when traveling forward, the bucket will dig in and raise the machine up. The float feature should only be used when traveling in reverse performing grading operations. WB140PS-2N WB150PS-2N 2-45