MAINTENANCE PRECAUTIONS DURING SEASONAL CHANGES Where severe temperature changes are expected, take preventive measures to limit any damage resulting from extremely low or extremely high temperatures. COLD WEATHER At the end of the day, perform the following steps to prevent any future problems. Remove any mud or water from the machine and its undercarriage. Park the machine in a protected area if possible. Drain any condensation from filters and water traps. If possible, remove the battery and store in a warmer location if temperatures will be extremely cold. Always allow the machine time to warm up during cold seasons.
FUEL AND LUBRICANTS In colder climates, use winterized fuel DSTM D975 N 1 when ambient temperature is below -10° C (14° F). Do not mix gasoline with diesel fuel. This will damage the fuel system. Change the engine oil, using a viscosity oil for the climate. COOLANT The required standards for permanent antifreeze are SAE-J1034 and Federal Standard O-A-548D. Never mix antifreezes or add additives to the cooling system. Remark Never use flammable liquids in the cooling system. BATTERY When ambient temperatures decrease, the battery capacity decreases accordingly. If the battery charge is low, the electrolyte may freeze.
Keep the battery completely charged and insulated to protect it from low temperatures. To avoid explosions, do not create sparks, smoke or have open flames near the battery. To Measure The Specific Gravity Of The Electrolyte Refer To The Following Table. WB140PS-2N WB150PS-2N 3-3 Percentage Of Charge Electrolyte Temperature 20° C (68° F) 0° C (32° F) -10°C (14° F) -20° C (-4° F) 100% 1.28 1.29 1.30 1.31 90% 1.26 1.27 1.28 1.29 80% 1.24 1.25 1.26 1.27 75% 1.23 1.24 1.25 1.26