Komatsu — CHECK THE ENGINE OIL LEVEL

MAINTENANCE CHECK THE COOLANT LEVEL Do not remove the radiator cap. Check coolant level at the expansion tank with the engine cold. The coolant level can be checked at the expansion tank (1). The expan- sion tank (1) can be reached after opening the engine hood. With the engine cold, coolant must be between the MIN and MAX marks. If the coolant level is near or lower than the MIN mark, fill the tank with coolant. A small but constant decrease or sudden, large decrease indicates a leak. Check the radiator, engine, heater core, and hoses for leaks. The upper MIN. and MAX. marks indicate the expansion level of the coolant at operating temperature.

CHECK THE ENGINE OIL LEVEL After the machine is stopped, the engine is very hot. Let the engine cool down before performing any check. Hot engines may cause burns. The dipstick ( 1 ) can be reached through an opening in the right side of engine hood after opening the inspection cover (2). Perform the check with a cold engine and the machine on level ground. Check the oil level using the dipstick (1). The oil must be between the MIN. and MAX. marks. If the level is near the MIN. mark, add the proper viscosity oil according to the ambient temperature. When checking the oil level, stop the engine and wait 15 min- utes before checking. WB140PS-2N WB150PS-2N 3-33