Komatsu — CHANGE THE COOLANT

MAINTENANCE CHANGE THE COOLANT After operating the machine, the coolant is very hot and under pressure and may cause serious burns. Wait until the coolant is from 40° to 45° C (104° to 113° F) before servicing the cooling system. Slowly loosen the radiator cap to release the residual pressure. Oils, filters, coolant, and the battery are considered special waste and must be collected and dis- posed of according to all antipollution regulations. Flush the cooling system to eliminate any calcium carbonate deposits. 1. Open the engine hood. 2. Slowly loosen and then remove the radiator cap (1). 3. Open the radiator drain cock (2). 4.

Using a 12 mm wrench, loosen the drain valve (3) on the filter head. Let the coolant drain into a container of suitable capacity. WB140PS-2N WB150PS-2N 3-59