MAINTENANCE To change the secondary cartridge: 1. Remove the primary element. 2. Remove safety cartridge (6) and replace it with a new one. 3. After installing the safety cartridge (6) inside the filter case (4), make sure that it is seated in its housing. 4. Reassemble the unit as described above, making sure that all filter components are locked. 5. Push the safety lock (1) towards the inside. CHECK AND CLEAN CAB AIR FILTERS Always wear safety goggles during cleaning operations. Outside air that enters the cab is filtered. This filter is on right side of the cab. The cab filter prevents impurities in the outside air from entering the cab. Whenever circulation decreases, clean the filter.
The filter can be reached from outside of the cab. To clean the filter: 1. Remove: screws (1), external protection (2), and filter element (3). 2. Tap element lightly with the palm of your hand to remove any dust. Blow compressed air on the filter surfaces, keeping the air nozzle at about 15 cm (5.9 in.) from the filter. Make sure that pressure does not exceed 4 to 5 bars (58 to 73 PSI). 3. Clean the filter casing, taking care to prevent any foreign debris from entering the suction duct. 4. Reassemble the unit. If the machine has air conditioning (3), an additional cab filter (6) exists for internal air recirculation. WB140PS-2N WB150PS-2N 3-63