OPTIONAL ATTACHMENTS MULTIPURPOSE BUCKET WITH FORK LIFT Before working with the fork lift, the operator must learn to maneuver with the forks because of the added length beyond the bucket. The operator must also learn how to operate the fork controls before using the fork lift. Position the forks as far apart as possible for a given load to provide the greatest stability. To prevent the load from slipping sideways, position each fork between two teeth and both forks resting on the bucket blade. After positioning the forks into the load but before suspending the load, position the load to prevent it from slipping.
To avoid vibrations that may cause the load to shift, operate the shift, oscillation, and lift controls slowly and smoothly. Be careful when grasping the forks for removal or installation because your feet and hands could get cut. Have two people install or remove the forks. The optional pallet forks are usually installed on the multipurpose bucket for handling pallets, loading and unloading various pipe. Sliding the forks on the bar (2) adjusts the distance between them. FORK ADJUSTMENT 1. Position the forks (1) to the front of the machine. 2. Raise the bucket to clear the ground. 3. Tip the bucket forward to release the forks (1) from the bucket teeth. 4.
Slide the forks (1) apart the as far apart as possible to handle the given load. 5. Tip the bucket back so the forks (1) do not rest on the tips of the bucket teeth. Position each fork (1) between two teeth. 6. Position the lifting arm so the forks (1) are horizontal. 7. Lubricate the fork rotation pins. Remark When using the forks be sure the forks are fully engaged into the load. Never carry a load with the tips of the forks. Always be aware of the extra length the forks add when maneuvering the machine. WB140PS-2N WB150PS-2N 5-11