OPTIONAL ATTACHMENTS BACKHOE TELESCOPIC ARM Before releasing and extending the arm, ensure that the stabilizers rest on firm ground. If possible, unload the material as close to the machine as possible. Working with the backhoe misaligned makes the machine unstable and cause it to tip over. Thus, operate the arm slowly when swinging it to unload the material when working with a misaligned backhoe. Using the optional telescoping arm extends the reach of the backhoe arm. This situation makes it possible to perform opera- tions outside of the normal backhoe radius. However, using the telescopic arm reduces the breakout force, which means the backhoe must lift lighter loads.
DESCRIPTION AND CONTROL The telescopic arm has an external hollow arm (1), which the inner arm (2) slides through on a V-shaped guides. This arm extends or retracts hydraulically. A pedal (3) controls the telescopic arm movement. Pressing the front of the pedal extends the arm. Pressing the rear of the pedal retracts the arm. Remark An extended arm reduces the breakout force of the backhoe when lifting loads. SAFETY LOCKS When traveling or operating the front end loader, insert the safety clip (4) into the telescopic arm. Secure the clip (4) with the pin (5).
When using a hammer, compactor, or similar attachments contact your Komatsu dealer prior to using any attachment with the telescopic arm. To install the safety lock, retract the arm fully, remove the pin and clip from its holding place and insert it into the holes cut in the arm boss. WB140PS-2N WB150PS-2N 5-13