OPTIONAL ATTACHMENTS HAMMER USAGE RULES When using the hammer attachment, always wear eye and hearing protection. Never allow anyone to stand near you while using the hammer. For correct usage, it is necessary to: 1. Make sure the hammer angle is correct with respect to the material to be broken. Ensure the hammer is as perpendicular as possible and the arm thrust is sufficient. That way full power of the hammer can be used. 2. As the hammer penetrates the material, raise the wheels about 5 cm (2 in.) off the ground to keep constant pressure on the hammer. Be careful not to swing or move the machine when performing this operation. 3.
When working on very hard materials, do not to keep hitting the same point for more than 30 seconds. Hit the same point a few sec- onds and then change the hammer position frequently to facilitate the breaking process. Remark The power in the backhoe is the breakout feature when using this tool. Do not use the backhoe to reposition or swing the machine to the left or right. Doing so will damage the swing cylinders or possibly tip the machine over. WB140PS-2N WB150PS-2N 5-17