OPTIONAL ATTACHMENTS REMOVAL To remove the hammer: 1. Stop the engine. 2. Neutralize all the hydraulic controls to relieve the hydraulic pressure in those hydraulic circuits. 3. Press the hammer control pedal to release the hydraulic pressure in the hammer hydraulic circuit. 4. Disconnect the hammer delivery and return lines, capping them immediately. 5. Disconnect the hammer from the constraints. See “CHANGING THE BACKHOE BUCKET” on page 2-54. 6. Operate the controls and check for hydraulic leaks around the caps. Always wear thick gloves and safety goggles when checking the hydraulic circuit for leaks. Wear thick gloves while using a piece of cardboard to check for leaks.
WB140PS-2N WB150PS-2N 5-23