SAFETY TRANSPORTING THE MACHINE Before transporting the machine, ensure that the transport truck is capable of supporting the machine’s weight. Perform the loading and unloading of the machine on flat, dry ground and at a safe distance from the edge of the road or ditches. Position chocks behind and in front of each tire of the transport vehicle before loading or unloading the machine. Ensure that the ramps are of the same length and parallel to each other, and firmly anchored to the transport truck. Check that the ramps can safely support the machine; if not, purchase new ramps. Remove any grease, oil, or ice from the ramps before unloading or loading the machine.
Maximum ramp inclination is 15 degrees. LOADING AND SECURING THE MACHINE Locate the tie down and transportation brackets (A, B) on the machine. Be sure they are in good condition. WB140PS-2N WB150PS-2N 1-25