Komatsu — HIGH TEMPERATURES AREAS

SAFETY HIGH-PRESSURE HOSES Do not use bent, cut, or cracked tubing or hoses that have been previ- ously rejected because of leaks or other defects. Faulty hoses can burst during operation, causing personal injury or fire. Repair or replace any loose or faulty fuel or hydraulic lines immedi- ately. Do not operate the machine with damaged or leaking hoses or lines. Hydraulic systems are always under pressure. If servicing or inspecting the hydraulic system, lower the work equipment to the ground. Release system pressure and residual tank pressure before servicing. Leaks from pressurized hydraulic lines are extremely dangerous because the spray can penetrate the skin and enter the bloodstream.

Always wear thick gloves and protective goggles when working on the hydraulic systems. Use a sheet of cardboard or plywood while searching for leaks. If struck by high-pressure hydraulic fluid, consult a doctor immediately for appropriate treatment. HIGH-TEMPERATURES AREAS Immediately after turning the engine off, the following items remain hot or under pressure: engine coolant, engine oil, hydraulic oil, all engine parts, and exhaust stack. Perform maintenance only when the machine has had time to cool down. If not, serious injury, including severe burns, could result. WB140PS-2N WB150PS-2N 1-35