OPERATION FRONT INSTRUMENTS AND CONTROLS 1. Transmission oil temperature alert 2. Engine coolant temperature alert 3. Four-wheel drive indicator light 4. Low fuel alert 5. Directional signal indicator 6. High beam indicator 7. Parking brake/low brake fluid alert 8. Differential LOCK/UNLOCK light 9. Multifunction/directional switch 10. Four-wheel drive push button 11. Windshield wiper/washer switch 12. Front work lamps switch 13. Emergency/Hazard lights switch 14. Optional switch locations 15. Electric safety valve switch (optional) TRANSMISSION OIL TEMPERATURE ALERT This warning light (1) glows and an audible alarm sounds when the transmission oil overheats.
If this light and alarm come on, immedi- ately stop the machine and select neutral gear. Let the transmission oil cool down with the engine running at about 1,200 RPM until the alarm stops. If the alarm and warning light come on frequently, have the machine checked by an authorized Komatsu dealer. Do not continue to operate the machine. ENGINE COOLANT TEMPERATURE ALERT This warning light (2) glows and an audible alarm sounds when the engine overheats. If this light and alarm come on, immediately stop the machine and select neutral gear. Let the engine run at about 1,200 RPM until the alarm stops.
If the engine continues to over- heat or occurs frequently, have the machine checked by an autho- rized Komatsu dealer. FOUR-WHEEL DRIVE INDICATOR When four-wheel drive (3) is selected, this indicator light glows to indicate the four-wheel drive system is engaged. When the indica- tor light is off, the four-wheel drive system is disengaged. WB140PS-2N WB150PS-2N 2-5