OPERATION 143 MOVING THE VEHICLE GENERAL INFORMATION Braking Avoid sudden stops. Constant sudden stops may negatively affect braking performance and driving parts. When slowing, leave the clutch (if equipped) engaged as long as possible to use the braking effect of the engine. CAUTION When using the braking effect of the engine, final gear selection is critical. If gear selection is too high, the vehicle will buck which could cause loss of control. Engine Temperature Before entering high-speed traffic conditions, allow the engine to reach normal operating temperature. A normal operating range is between 77°C and 104°C (170°F and 220°F) for stationary vehicles. 1.
To move the vehicle, begin by starting the engine and waiting until it reaches normal operating range (see Coolant Temperature Gauge in the Instrument Panel section for the correct engine temperature). 2. Shift transmission into the desired gear. Refer to the Transmission Shifting Instructions section for shifting instructions (including the proper starting gear). 3. Release the parking brake. CAUTION If the Parking Brake indicator light is on, do NOT attempt to move the vehicle or driveline damage may result. 4. Apply the accelerator enough for the engine to move the load. Right-Side Operation Note: Speed is restricted to second gear when operating the vehicle from the right-hand side.