56 INSTRUMENTS AND CONTROLS Optional Tell-Tales HEST Indicator (Amber) — The High Exhaust Temperature (HEST) indicator is displayed when the exhaust temperature reaches 300°C (572°F) and the regeneration process begins. When the regeneration process is completed, the engine should be allowed to run until the HEST indicator shuts off. During regeneration while the vehicle is moving, the HEST indicator will only illuminate when vehicle speed is less than 8 kph (5 mph). During a parked regeneration, the HEST indicator will turn off when regeneration is complete and the exhaust temperature has returned to a normal temperature.
C0029146 Neutral Indicator — Indicates that the transmission is in Neutral. HEST Indicator Optional Tell-Tales Anti-Lock Brake System (ABS) Indicator (Amber) — Indicates an ABS malfunction. Also illuminates momentarily as a bulb check when the ignition is turned on. If the light turns on and stays on, a malfunction is indicated. If the light does not turn on when the ignition is turned on, the bulb and the power source may be defective. For additional information on operating an ABS-equipped vehicle, refer to “Anti-Lock Brake System (ABS)”, page 127, in the OPERATION section. Note:
When an ABS malfunction is detected, anti-lock braking in the affected wheel will be disabled and normal braking will return; the other wheels will retain anti-lock braking. Automatic Traction Control (ATC) Indicator Indicates that ATC is operating. Optional Tell-Tales Aftertreatment DPF Regeneration Required Icon Flashes when the Diesel Particulate Filter is full or overfull and regeneration is needed. The icon flashes when the filter is Check Transmission Warning Indicator (If Equipped) — Only present on vehicles equipped with automatic transmission. Optional Tell-Tales