PRE-TRIP INSPECTION AND DAILY MAINTENANCE 79 Step 8: Left Saddle Tank and Left Rear Vehicle Wheels Area Dual Wheels, One or Two Axles Check condition of wheels and rims. Especially look for cracks, missing lockrings, bent or broken spacers, studs, missing clamps or lug nuts. Check condition of tires: properly inflated, no serious cuts, bulges, tread wear or any signs of misalignment; valve stems not touching wheels, rims or brake drums; valve caps in place and no objects stuck between the wheels. • Check that both tires are of same type, for example, not mixed radial and bias type and that their circumferences are matched. • Check wheel bearing and hub:
no obvious leaking on outside or inside wheel. Suspension • Check condition of springs (leaf or air), spring hangers, shackles and U-bolts, no cracks, breaks or shifting. Brakes • Condition of brake drums. With brakes released, look for a noticeable gap between lining and drum. (This check cannot be made if dust covers are in place.) • Condition of brake hoses: check for any chafing. • Check brake chamber mounting bolts and brackets. Check slack adjusters and chamber push rod travel. With brakes applied or released, look for conspicuously different positions of the slack adjusters for proper brake adjustment.. Check spring brakes. Condition of Visible Components Transmission: not leaking.
Drive shaft: looks OK. • Exhaust system: secure, not leaking, not touching wires, fuel or air tubing. • Frame and cross members: no bends, cracks or breaks. • Air tubing and electrical wiring: secured against snagging and chafing. Left Fuel Tank(s) Securely mounted and not damaged or leaking.